Savage Shooters Forum
March 18, 2010, 05:06:18 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Political posts of any type are not welcome on this site.  If you wish to discuss such things, please go to one of the millions of political websites, blogs or forums available on the internet.
 
   Home   Help Login Register  


Visit our Sponsors page to see all of our advertisers' banners

Savage Shooters Forum > Savage Firearm Tech > Tech Archive > Will it fit?
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Will it fit?  (Read 1158 times)
handirifle
Member
Basic User
*
Offline Offline

Posts: 975


WWW
« on: April 29, 2008, 01:09:45 AM »
Will a one piece scope base for a long action 110, fit a "J" series 110?
Logged
pdog06
Member
Basic User
*
Offline Offline

Posts: 4482
« Reply #1 on: April 29, 2008, 08:11:21 AM »
No, it will not fit. I just sold a 1 pc intermediate action base to NorcalMikie and he was wondering the same thing. I took measurements from both my intermediate action and my long action, and no combination lined up.

Here's a link to that thread where I also posted my measurements.

http://savageshooters.com/SavageForum/index.php?topic=14690.0

HTH,
    mike
« Last Edit: April 29, 2008, 01:52:05 PM by pdog06 » Logged
12targt/Sav-2/McGowen 6br/Stockade PDog/Viper
12targt/SSS trigger/Brux 260/SSS HBR/S3 8-32
116ss/Sav-1/Mcgowen 308/Duramax/Elite3200
Stevens/SSS trigger/PacNor 22-250/Medalist/Viper
Striker/timney/Mcgowen 6br/lam.stock/Burris
112s.shot/PacNor 243/?/?
Stevens/ss223/Elite3200
ss 17hmr/Stocky's
Blue Avenger
Staff
Basic User
*
Offline Offline

Posts: 4341


Kasson, MN
« Reply #2 on: April 29, 2008, 10:16:39 AM »
If you do not mind an extra hole you can drill and tap another set in the back. Did that to my "10" action so I could change scopes with out moving the rings between my 10 and 110s
Logged
.223 Rem AI, .243 Win AI, .6MM Rem AI, .257 Rob AI, .25-06 Rem AI, .30-06 AI

Greg Idso
geargrinder
Member
Basic User
*
Offline Offline

Posts: 1037
« Reply #3 on: April 29, 2008, 01:11:03 PM »
Don't we need to know what caliber it is?  To determine if it is in fact an intermediate action?

I have a "J" series 7RM that is a long action.
Logged
"Muzzle velocity is a depreciating asset, not unlike a new car, but BC, like diamonds, is forever."
-German A. Salazar

Shoot in the monthly email match.
Win a paid membership. 
Click Here
pdog06
Member
Basic User
*
Offline Offline

Posts: 4482
« Reply #4 on: April 29, 2008, 01:50:21 PM »
Quote from: geargrinder on April 29, 2008, 01:11:03 PM
Don't we need to know what caliber it is?  To determine if it is in fact an intermediate action?

I have a "J" series 7RM that is a long action.

Yes, if it is a long action it is the same spacing. If it is a true intermediate action(4.522" action screw spacing) it will not work.

Just noticed I never added the link in my earlier post. Doing it now. Sorry
Logged
12targt/Sav-2/McGowen 6br/Stockade PDog/Viper
12targt/SSS trigger/Brux 260/SSS HBR/S3 8-32
116ss/Sav-1/Mcgowen 308/Duramax/Elite3200
Stevens/SSS trigger/PacNor 22-250/Medalist/Viper
Striker/timney/Mcgowen 6br/lam.stock/Burris
112s.shot/PacNor 243/?/?
Stevens/ss223/Elite3200
ss 17hmr/Stocky's
handirifle
Member
Basic User
*
Offline Offline

Posts: 975


WWW
« Reply #5 on: April 29, 2008, 10:35:52 PM »
Haven't measured it in a while, but am almost positive I remember it being the 4.52" but will check again tomorrow.


Update:  I checked and it IS a 4.52" action, true intermediate.
« Last Edit: April 29, 2008, 11:13:53 PM by handirifle » Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by SMF 1.1.10 | SMF © 2006-2009, Simple Machines LLC Page created in 0.118 seconds with 22 queries.