Savage Shooters Forum
March 19, 2010, 02:39:38 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Just a reminder, links to commercial websites (retailers, manufacturers, service providers, etc) are NOT permitted in your signature unless you are a paid advertiser.  No exceptions.
 
   Home   Help Login Register  


Visit our Sponsors page to see all of our advertisers' banners

Pages: [1]   Go Down
  Print  
Author Topic: Full diameter bullets in Savage ML  (Read 482 times)
.308 Winchester
Basic User
*
Offline Offline

Posts: 1


« on: October 23, 2009, 02:26:22 PM »

  I see where some folks are talking about problems with barrel heating and saboted bullets when using smokeless powder.  Can you use smokeless powder under something like a T/C Maxi Hunter bullet that uses no sabot?  I'm new here and don't know much about this rifle.  I've shot black powder for a couple of decades but have never used this Savage ML.  Thanks.
Logged
RandyWakeman
Moderator
Basic User
*
Offline Offline

Posts: 596


WWW
« Reply #1 on: October 23, 2009, 04:28:27 PM »

No, it is 250 - 300 grain sabots only in the Savage with smokeless. Actually, you can easily get a barrel hot enough to affect accuracy with Triple Se7en, Blackhorn 209, or other subs. None of it matters for "one shot, one kill" hunting.

Going bore size (".50 cal.") with bullets of the same weight is fail, as it gives you poor sectional density, penetration, and exterior ballistics compared to .45 caliber characteristics.
Logged

--Randy
tucker301
Basic User
*
Offline Offline

Posts: 1375



« Reply #2 on: October 23, 2009, 07:10:06 PM »

While it is in violation of the manual, many Savage ML shooters are now tinkering with knurling bullets for a tight fit, and loading smokeless, sabotless.
I've seen most reports of it to be in the .45 Pacnors, but some are also tinkering with the .50's now.

It's not something I have tried yet, but I mjst admit that the idea of doing away with 1/3 of the components and shooting a .45 in a .45 bore is beginning to eat at me just a bit.  Wink

.308, shoot me a PM if you want to know more and I'll point you to the information.
« Last Edit: October 23, 2009, 07:11:19 PM by tucker301 » Logged
Wild Bill Bucks
Basic User
*
Offline Offline

Posts: 25


« Reply #3 on: October 26, 2009, 10:36:30 AM »

.308

Any powder, in any rifle, of any caliber, if shot repeatedly, will eventually cause barrel heating, and loss of accuracy. Always let the barrel cool down after every couple of shots, and this rifle will drive tacks all day. Use the recommended loads and powders, and the rifle will last you a lifetime, and will fast become your favorite.
No hunting rifle is made to shoot 50 times an hour at the range, and still produce good accuracy.
Most of the guys complaining about barrel heat, are the kind of guys that like to hear the gun go boom. Most guys who actually hunt with these rifles, have no such problems.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by SMF 1.1.10 | SMF © 2006-2009, Simple Machines LLC Page created in 0.129 seconds with 25 queries.