Savage Shooters Forum
March 18, 2010, 09:21:47 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Just a reminder, links to commercial websites (retailers, manufacturers, service providers, etc) are NOT permitted in your signature unless you are a paid advertiser.  No exceptions.
 
   Home   Help Login Register  


Visit our Sponsors page to see all of our advertisers' banners

Savage Shooters Forum > Firearm Accessories > Optics & Mounts (Moderator: broncbob) > Can't find a scope mount locally.
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Can't find a scope mount locally.  (Read 252 times)
Pathfinder
Basic User
*
Offline Offline

Posts: 110
« on: November 02, 2009, 05:43:41 PM »
I need a scope mount for my 110C. Problem is, all the locals carry mounts for a receiver that is rounded from front to back. The front of my receiver is rounded, and the back is flat. I don't mind ordering off the internet, if I can figure out what to look for, and where to shop.

Any ideas?
Logged
Solothurn
Member
Basic User
*
Offline Offline

Posts: 37
« Reply #1 on: November 02, 2009, 06:21:01 PM »
http://www.brownells.com/.aspx/sid=42225/pid=7799/sku/Short_Action__MB_fits_Sav_10_thru_116__RH_w_Accutrigger

http://www.brownells.com/.aspx/sid=42254/pid=7799/sku/Long_Action__Pol_Blue_fits_Sav_110_116_LH_w_Accutrigger
Logged
Stevens 200, .223/ McGowan 20" varmint/ McRee MP-MODSS/ Rifle Basix SAV1/ Nikon Buckmasters 4.5x-14x 40mm mil-dot
Pathfinder
Basic User
*
Offline Offline

Posts: 110
« Reply #2 on: November 02, 2009, 06:59:13 PM »
My rifle doesn't have accutrigger. Every scope base I've found has been for accutrigger, and they all have the same problem. The rear of the action is rounded.

This is the rear of the action on my rifle...
Logged
Balljoint
Member
Basic User
*
Offline Offline

Posts: 832
« Reply #3 on: November 02, 2009, 07:19:26 PM »
Try www.egw-guns.com may have what you want
Logged
5spd
Basic User
*
Offline Offline

Posts: 44
« Reply #4 on: November 02, 2009, 08:07:50 PM »
You can get one here also.
They have the one you need.

 http://www.midwayusa.com/Search/#_100
Logged
Pathfinder
Basic User
*
Offline Offline

Posts: 110
« Reply #5 on: November 02, 2009, 08:14:54 PM »
Thanks.
Logged
GaCop
Member
Basic User
*
Offline Offline

Posts: 726


Central Georgia
« Reply #6 on: November 07, 2009, 05:26:47 AM »
+1 on the EGW base.  I use it on all my Savages.  It's made for the older flat rear or newer rounded.  You can order directly from EGW's web site too.
Logged
Tom
rjtfroggy
Member
Basic User
*
Offline Offline

Posts: 358
« Reply #7 on: November 07, 2009, 07:29:32 AM »

 www.burris.com
 www.swfa.com
 both sites will have listings for bases and rings for your needs
 swfa will be cheaper and a little faster with shipping.
Logged
FROGGY

 mod. 11 22-250
 mod.11 243
 mod. 10fp 223
 mod.10 fp 308
 mod. 12 223
 mod.110 fp 7mm rem mag
 mod. 112 vlp 25-06
 mark II 22lr
 more to come
bythebook
Member
Basic User
*
Online Online

Posts: 242
« Reply #8 on: November 07, 2009, 07:00:10 PM »

 I just ordered Burris Zee Rings and a 1 piece EGW base from Opticsplanet and it was cheaper than Midway and the same price as EGW and they have free shipping.
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  



Visit our Sponsors page to see all of our advertisers' banners

Powered by SMF 1.1.10 | SMF © 2006-2009, Simple Machines LLC Page created in 0.187 seconds with 22 queries.