Savage Shooters Forum
March 19, 2010, 01:14:21 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Just a reminder, links to commercial websites (retailers, manufacturers, service providers, etc) are NOT permitted in your signature unless you are a paid advertiser.  No exceptions.
 
   Home   Help Login Register  


Visit our Sponsors page to see all of our advertisers' banners

Pages: [1]   Go Down
  Print  
Author Topic: Aftermarket High tech stocks ??  (Read 425 times)
Medic_01
Basic User
*
Offline Offline

Posts: 77



« on: November 04, 2009, 01:44:25 AM »

Is there any sexy aftermarket stocks out there for the savage MKII's ??

something like this would be great.

or anything else "high tech" looking ?


lastly, what's the differences between say a 10/22 and a MKII when it comes to jamming the action into a stock.
e.g a savage action in a 10/22 aftermarket stock ?

Logged

Saving a Life is the Ultimate Rush
shelbyfan
Member
Basic User
*
Offline Offline

Posts: 189



« Reply #1 on: November 04, 2009, 03:01:22 AM »

Mostly because the bolt action needs a lot more room to cycle horizontally and the 10/22 action is about 4 times the size. That type of stock for a bolt action is fairly inefficient, it just not work like you would think. Cycling the action would be a serious pain.
Logged

I was wrong, get over it.
rogerxd45
Basic User
*
Offline Offline

Posts: 18


« Reply #2 on: November 06, 2009, 01:07:19 PM »

yea i dont think it would work since the bolt travels outside the action where as the 10/22 the bolt stays in. you also have to worry about the bolt lift

so if you want a stock like that your pretty much stuck with the 10/22 unless you can find a machinest that can custom make you a stock but that would cost a TON
Logged
Medic_01
Basic User
*
Offline Offline

Posts: 77



« Reply #3 on: November 21, 2009, 02:48:53 AM »

cool
thanks guys
Logged

Saving a Life is the Ultimate Rush
Pages: [1]   Go Up
  Print  
 
Jump to:  



Visit our Sponsors page to see all of our advertisers' banners

Powered by SMF 1.1.10 | SMF © 2006-2009, Simple Machines LLC Page created in 0.145 seconds with 21 queries.