View Full Version : Bolt Assembly Screw
Moore
08-16-2011, 05:49 PM
Are the threads on the bolt assembly screw RH or LH? How do you or what do you use to hold the bolt while removing the screw? I'm guessing "Big Bertha" torqued the screw at the factory or does it have loctite on it? Any info on how to remove the screw would be appreciated.
Thanks!
nwkman
08-16-2011, 06:06 PM
lay it on some cardboard bolt on the left, stick an allen in on the left side. Step on it!
Quickshot
08-16-2011, 06:11 PM
As seen here a lot of times, righty ,tighty & lefty loosey. Put the allen wrench in and set it on the floor so when you stomp on it it comes loose. Cracks like a 22 first time. Don't be shy STOMP IT. You'll be using the bolt handle as a brace to get the leverage. Quick
lal357
08-16-2011, 07:43 PM
been looking at this on you tube
http://www.youtube.com/watch?v=cIwyywJZf-4&feature=BFa&list=UL3VX0Pnk-OT0&index=1
going start playing with mine here soon
geargrinder
08-16-2011, 11:11 PM
As seen here a lot of times, righty ,tighty & lefty loosey. Put the allen wrench in and set it on the floor so when you stomp on it it comes loose. Cracks like a 22 first time. Don't be shy STOMP IT. You'll be using the bolt handle as a brace to get the leverage. Quick
Yes, when it goes, it will sound and feel like you broke it. Perfectly normal. All will be well once your heart starts beating again.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.