View Full Version : saftey not working
cooker900
12-21-2011, 10:16 PM
Ok im lost
i jsut did a rebarrel on a LA 110 and the saftey is not working.
you can still pull the trigger and get a click when its in the safe position.
i did nothing to the trigger area of the action all i did was remove the barrel and put a new one on.
looking for help in this matter
Blue Avenger
12-21-2011, 11:45 PM
turn the set screw on the back of the trigger so you can not pull it. you probable are just now finding it as you were doing a serious test.
stangfish
12-22-2011, 01:50 AM
turn the set screw on the back of the trigger so you can not pull it. you probable are just now finding it as you were doing a serious test.
yup. Go through the whole trigger/safety adjustment with the bump/pull tests to be on the safe side.
http://savageshooters.com/SavageForum/index.php/topic,510.0.html
lal357
12-22-2011, 07:45 AM
the one on my 7mag i just got was doing the same thing i noticed that when it was on safe as i tried to pll the trigger the safety would ride up off the frame before it went click. since it was broke (at the tang) i replaced it and the new one did the same thing found a allenscrew in the center of the safety and turned it just till it made contact with the frame .reset the other screws on the trigger checked for function works like a charm now.
cooker900
12-22-2011, 03:41 PM
thanks ill do that when i get home
cooker900
12-22-2011, 10:50 PM
thanks guys it worked
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.