View Full Version : 1st Gen 110
cowboybart
02-12-2012, 08:01 PM
Where can I find a "tactical" stock for a heavy barreled 22-250 that is a First Gen 110??
4.5" screw spacing - staggered feed
ellobo
02-12-2012, 08:27 PM
Check Boyds website and see if thier short action stock will will take the magazine in your rifle. I think thier SA stock, stagger feed just might. You may have to open up the barrel channel for the heavy barrel. Finished laminates in 3 models for $97. You can have them checkered for an extra $50.
El Lobo
cowboybart
02-12-2012, 11:06 PM
They only have the Classic" style for the "intermediate" action.
ellobo
02-12-2012, 11:17 PM
I think the earliest "intermediate" stock had a 5.062 bolt spacing but the second iteration had the 4.52 bolt spacing in which case the other stock models may work. A measurement of the magazine position and bolt position may determine if they will work. A call to Boyds may help. I have spoken to them and they are very helpfull. Have your dimensions handy. The 2 stocks I got were the standard style "JRS" model. They didn't have the Prairie Hunter avaialble at that time.
El Lobo
cowboybart
02-13-2012, 11:20 AM
The 5" spread is for a long action
Nor Cal Mikie
02-13-2012, 11:28 AM
The back end of the action is the same. It's the front action screw measurements that's different. I got a short action stock, moved the front screw hole up a bit (less than 1/4") and added a front pillar. Real easy to do before you get involved in bedding the action. ;)
12fv 308
02-13-2012, 01:13 PM
Sharp shootersupply and Stockade gun stocks make stocks for the 4.52 spacing. Just tell them when you order...
Pete
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.