223 pet loads Lets see'em

[quickkillaught6]

http://i1112.photobucket.com/albums/k493/onesolidbarr/photo.jpg

[quickkillaught6]

http://i1112.photobucket.com/albums/k493/onesolidbarr/photo.jpg

[quickkillaught6]

http://i1112.photobucket.com/albums/k493/onesolidbarr/photo1.jpg

[quickkillaught6]

53's @ 200

http://i1112.photobucket.com/albums/k493/onesolidbarr/53sat200.png

[1Shot]

...On your H322 load go +.015 off & try that since you're in the middle of the load range..I like alittle faster powder myself.. I only use Varget for the Sie. 69's..

[quickkillaught6]

Thankya sir I will give it a try and post some pics soon as I get to the range

[quickkillaught6]

well 1shot you are a genius updates and thoughts??

http://i1112.photobucket.com/albums/k493/onesolidbarr/sav10h322.png


http://i1112.photobucket.com/albums/k493/onesolidbarr/sav10-varget-2.png

[sniper15545]

27 grains of Varget and a 50 grn Vmax with a CCI primer

[1Shot]

http://i1112.photobucket.com/albums/k493/onesolidbarr/sav10-varget-2.png



...What's the reason for 2.318 seating depth on the H4895..??? Might have to invest in a drop tube..lol...Need to start moving your seating depth in -.005 at a time... ;)

[quickkillaught6]

Lol I know what youre saying but the 53's taper very harshly like a vld bullet and to get them into the lands or close I started out the ladder testing at 2.318 so I didn't develope a hot load and then jam lengthen the oal and jam it into the lands an have a boom no pressure signs but I have tried all sorts of seating depths with
These I started at above and tightened them
Up by .010 at a time I'll dig up my targets and get you numbers I use fosters searing dies so I'm very
Precise hand weigh every charge with a 505 rcbs vld chamfer flash holes deburred

[1Shot]

..OK..You show 26.8grs of H4895 on your posted pic...Lets move that up to 27.2grs at 2.318 oal. Shoot one for 5 & post me the target...

[quickkillaught6]

Thank you 1shot I am waitin on bullets right now I started with varget because I have plenty of that and h4895 with the varget I started at 2.318 to 2.260 in .010 increments and with the varget at 27 with a tighter seating depth at 2.270 it would do 2-3" groups @100 I will try 27.2 H and the 53's when projectiles come in thank you so much for the help I appreciate it a whole bunch

[quickkillaught6]

http://i1112.photobucket.com/albums/k493/onesolidbarr/3-10-1253vmax272.png

as you requested seated at 2.318 27.2h4895 had very similar results with close to max charges with varget with no avail. went to the h4895 as a bit faster burning powder havent found anything yet. the H322 looks to be winning so far. advice please

and the top of the target is on the left side me and photobucket is about to have it out.

[1Shot]

..How far off the lands are you at 2.318..?

[quickkillaught6]

To be completely honest I'm not 100% sure on this particular rifle I can usually size an empty fired and seat it long look for marks on the bullet take that measurement and subtract it from the oal of the cartridge bullet combo in question. I have a hornady aol gauge on order to be more precise I've gotten to far into this reloading to not have one but I will have. Still kinda green at it so for that I appoligize. I've gotten extremely lucky on my reloading endevers so far but this bullet is my white elephant so time to get help and work through it

[1Shot]

To be completely honest I'm not 100% sure on this particular rifle I can usually size an empty fired and seat it long look for marks on the bullet take that measurement and subtract it from the oal of the cartridge bullet combo in question. I have a hornady aol gauge on order to be more precise I've gotten to far into this reloading to not have one but I will have. Still kinda green at it so for that I appoligize. I've gotten extremely lucky on my reloading endevers so far but this bullet is my white elephant so time to get help and work through it


...Well lets just push it out to 2.330 & try it again.. ;)

[quickkillaught6]

Rather lengthen by .05 at groups of 3 or 5 until 2.330?

[quickkillaught6]

http://i1112.photobucket.com/albums/k493/onesolidbarr/2722320.png


http://i1112.photobucket.com/albums/k493/onesolidbarr/272-2330.png


http://i1112.photobucket.com/albums/k493/onesolidbarr/272-2325.png

[1Shot]

...Closing in on it...lol..Push it out another +.005 = 2.335

[quickkillaught6]

Lol I'd recon I should have a aol gauge by thursday I hope I'll take some measurements but keep push'in them out .05 at a time surely something's gotta work