cwsanfor
08-25-2012, 07:06 PM
I have a new 11/111 Trophy Hunter XP, and am having trouble rmoving the stock. I followed the directions in the manual:
"1. Turn the firearm upside down, with the muzzle pointed away from you.
2. Using a 5/32” Allen wrench, loosen and remove the two screws securing the stock. FIGURE 9
is for a TOP LOAD or DETACHABLE BOX MAGAZINE and FIGURE 10 shows the HINGED
FLOOR PLATE
3. Remove the stock."
This barrel seems free toward the muzzle end, but the receiver seems tightly attached at the breech end. I googled this, and there's no indication that much force need be used. The bolt and magazine are removed, and I've tried with the gun on and off safety.
Does anyone have any ideas? Thanks in advance.
"1. Turn the firearm upside down, with the muzzle pointed away from you.
2. Using a 5/32” Allen wrench, loosen and remove the two screws securing the stock. FIGURE 9
is for a TOP LOAD or DETACHABLE BOX MAGAZINE and FIGURE 10 shows the HINGED
FLOOR PLATE
3. Remove the stock."
This barrel seems free toward the muzzle end, but the receiver seems tightly attached at the breech end. I googled this, and there's no indication that much force need be used. The bolt and magazine are removed, and I've tried with the gun on and off safety.
Does anyone have any ideas? Thanks in advance.