View Full Version : LA bolt head in SA
shovelheadave
09-03-2012, 09:15 PM
I was sure I was reading about this before but can't seem to find it.
Looking to put a 223 WSSM on a LH SA. I have a complete LH LA Mag bolt head but, haven't been able to locate a LH SA bolt head.
Any tricks for using a LA bolt head in a SA ??
Thanks guys.
Dave,
geargrinder
09-03-2012, 11:17 PM
The bolt heads are different, you'll have to shorten the shank to make a LA work in the SA bolt. I think you'll also need a SA magnum firing pin assembly. They are different than the standard and 223 sized SA firing pin assemblies.
shovelheadave
09-04-2012, 07:10 PM
So I need the bolt head and firing pin for a LH 16 WSM for my WSSM, correct ??
geargrinder
09-04-2012, 11:30 PM
A LH WSM bolt head will only work if it is a newer push feed bolt head. A CRF bolt head won't work. You may have to order one from SSS or shorten the shank of a LH LA one.
Yes, on the firing pin. You'll need one from a WSM.
shovelheadave
09-05-2012, 08:09 AM
thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.