View Full Version : Accutrigger for 110 stagger feed
brettnchrism
09-19-2012, 05:09 PM
Do they make a Accutrigger that would fit a old 110 stagger feed action? If not what would be my next option? Tried to adjust my stock trigger with no luck, and a 5 lb trigger pull is crazy...
thanks
rjtfroggy
09-19-2012, 05:22 PM
Do a search for trigger adj. "3 screw" should come up with quite a few how to's, that is what you need.
Or you can buy one of the aftermarket-SSS comp.,Timney,Rifle Basics your choice.
brettnchrism
09-20-2012, 12:58 AM
OK thanks rj I will take a look I found one and followed it but this old trigger is stiff..
HankC
09-20-2012, 07:30 PM
Change out the trigger spring with a lighter gauge spring wire.
devildogandboy
09-20-2012, 07:45 PM
brett, here's the info if you have the 3 screw.
http://www.savageshooters.com/content.php?130-Factory-3-Screw-Trigger-Adjustment-Procedures
brettnchrism
09-21-2012, 02:18 PM
thanks for the reply. devildogandboy that is the best explination i have seen yet. i need to book mark that...
Clint KY
09-21-2012, 03:20 PM
I can highly recommend the trigger from Rifle Basix. Absolutely transformed the way my rifle shoots. Very consistent and crisp. The best $85 I spent building the gun.
stomp442
09-21-2012, 04:16 PM
I prefer the SSS trigger over the rifle basix. Much easier to adjust and install with a much better trigger pull. IMO.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.