View Full Version : model 11 sa accutrigger question
Hotolds442
01-26-2014, 10:13 AM
Short answer: Weight and color of the sear stop. The BR trigger uses a few specialized parts. The Target trigger is not much more than a spring swap.
AZ_GUN_NUT
01-26-2014, 10:17 AM
The entire 6oz trigger part number is 107323. Very reasonably priced.
Making a note of that serial number and the trigger assembly number, good stuff to keep on hand! Thanks!
bushwackr
01-26-2014, 10:21 AM
Oh yes , I already have it in my little note book.
Hotolds442
01-26-2014, 10:28 AM
Making a note of that serial number and the trigger assembly number, good stuff to keep on hand! Thanks!
There are other parts needed.
2B,C, and D
4A,B, and C
bushwackr
01-26-2014, 10:29 AM
ok now that I have the numbers thank you both. what poundage does a person start running into tripping on chambering.
AZ_GUN_NUT
01-26-2014, 10:53 AM
There are other parts needed.
2B,C, and D
4A,B, and C
I just compared those numbers to the numbers for my standard Accutrigger. The only ones that are different is 2D and 4C. Thanks.
Hotolds442
01-26-2014, 11:03 AM
I just compared those numbers to the numbers for my standard Accutrigger. The only ones that are different is 2D and 4C. Thanks.
Perfect!
Ill have a list up later today in the FAQ of part numbers for the standard, target, and BR trigger assemblies.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.