View Full Version : Dillon 550b
Smith2928
03-04-2014, 07:52 PM
I am having an issue with my primers not going into the primer pocket properly! It's only on the Winchester .223 rem cases. seems like they are binding up and pinching a sliver of brass off of the primer pocket. Just wondering if any one has had an issue with this or can someone point out the problem!
short round
03-04-2014, 08:11 PM
Call dillon.
Rick_W
03-05-2014, 10:46 PM
Not to pass the buck, but - call Dillon. They will walk you through any issue.
Smith2928
03-05-2014, 10:50 PM
Thanks!!! I will give them a call!
jonbearman
03-06-2014, 11:16 AM
If they are crimped primer pockets such as military brass you will need to do a slight chamfer and swedging to get the pockets back to normal.
Smith2928
03-06-2014, 11:51 AM
They are not mill brass. I do uniform all my primer pockets. And I do also keep my military brass separate from my .223 brass. I am using cci #400 for my 110fp and #41 for my RRA ar15. I haven't been in the reloading room for a couple of nights but I am gonna start to look at the case retaining wire to see if that has moved where there is more play in the case as the primer seats!
emtrescue6
03-06-2014, 05:36 PM
I have a pile of Federal 223 cases that had crimped primers....so just an FYI, but some "non-military" brass does have crimped primers....
MacDR
03-06-2014, 06:31 PM
I haven't come across any crimped win brass but every AE Tac I have shot had a crimped primer pocket. I use the RCBS swager on them. I am surprised you are taking brass of the case as the primer is softer. Is your primer ram out of alignment?
DT400
03-06-2014, 06:54 PM
Maybe a silly question BUT...Do you have the correct shell plate?
Darrell
Smith2928
03-06-2014, 08:52 PM
I talked to the guy at dillon today he also thought it was the case retaining wire!
Smith2928
03-06-2014, 08:54 PM
Yes I do have the right shell plate in! Remember the only sill question is the one that is not asked lol!!
Smith2928
03-06-2014, 08:57 PM
I haven't come across any crimped win brass but every AE Tac I have shot had a crimped primer pocket. I use the RCBS swager on them. I am surprised you are taking brass of the case as the primer is softer. Is your primer ram out of alignment?
No it is all in alignment!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.