View Full Version : Torque for action screws and barrel band
triharley
03-15-2010, 07:51 AM
What is the Torque Settings for the Action Screws and Barrel Band on a Savage 340D .222 Remington.
Thanks
Nick
triharley
03-17-2010, 06:12 AM
Any suggestions.
My uncle broke down his gun and when he put it back together his groups really opened up.
I would start at about 25 inch pounds on the action screws and not go more than 35 inch pounds unless they are pillar bedded, as far as the barrel band I would try my best to avoid any torque at all on it, I don't see how this could be anything other than detrimental to accuracy. If it were mine and I was looking for the best accuracy I would probably take the barrel band off entirely.
Hope this helps!
Bob
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.