ger42
08-06-2014, 05:35 PM
I have a 110 in 6MM BR I was getting it ready for a new XLR stock UPS was to deliver today. I noticed the ejector was not grabbing the case (dummy round) I looked and it was installed backwards. The smith who tuned the action 10+ years ago must have done it. I removed the extractor and lost the spring. I had an extra bolt so I disassembled it and lost the little ball bearing. I purchased a bolt handle from Ebay and today decided to put it on. The bolt nut from the 6MM had the first few threads stripped so I had to use the one from the spare bolt only problem is old one is black spare is stainless. Ordered a black one from Brownells.
The stock arrived so it was assembly time. Problem front mounting screw was too long and was engaging the bolt so spent a little time with a file. Finally got it together and decided to stop before I messed something else up.
Then started cleaning my little room it has a security camera dvr, Hornady reloading press, A/C air handler, hot water heater, nuts and bolts , powder, cases, bullets, reloading tools some loaded ammo and a missing ball bearing, an extractor spring and from 2 weeks ago the sear spring lost when installing a Rifle Basix SAV -2 trigger.
Best news of the day found all the missing parts and a dime.
Tomorrow I install the scope and post pictures of my 110 .308 in a used XLR stock and the 6 MM BR in it's new XLR stock
Might get to the range this weekend if not then next tuesday.
The stock arrived so it was assembly time. Problem front mounting screw was too long and was engaging the bolt so spent a little time with a file. Finally got it together and decided to stop before I messed something else up.
Then started cleaning my little room it has a security camera dvr, Hornady reloading press, A/C air handler, hot water heater, nuts and bolts , powder, cases, bullets, reloading tools some loaded ammo and a missing ball bearing, an extractor spring and from 2 weeks ago the sear spring lost when installing a Rifle Basix SAV -2 trigger.
Best news of the day found all the missing parts and a dime.
Tomorrow I install the scope and post pictures of my 110 .308 in a used XLR stock and the 6 MM BR in it's new XLR stock
Might get to the range this weekend if not then next tuesday.