View Full Version : Devcon bedding
limige
11-22-2014, 04:59 AM
Only used acraglass so far. I was to try Devcon. Exactly what product are you using. Link would help.
GaCop
11-22-2014, 08:13 AM
I use the Devcon "Steel Putty" in the blister packs. I get it at my local building supply.
LongRange
11-22-2014, 10:26 AM
http://www.zoro.com/i/G2114576/?gclid=CL600-60jsICFc1AMgodrWwAHw
This is about the cheapest place ive found it...
tammons
11-22-2014, 12:36 PM
I use gray marine-tex and neutral kiwi shoe polish as a release agent.
gotcha
11-22-2014, 06:20 PM
Oops
6mmBR_Shooter
11-22-2014, 08:35 PM
http://www.zoro.com/i/G2114576/?gclid=CL600-60jsICFc1AMgodrWwAHw
This is about the cheapest place ive found it...
Agreed. I also recommend the neutral polish.
WYcoyote
11-22-2014, 10:18 PM
http://www.zoro.com/i/G2114576/?gclid=CL600-60jsICFc1AMgodrWwAHw
This is about the cheapest place ive found it...
Good stuff here.
I have used JB Weld and Accraglass and I prefer Devcon 10110 and Accrarelease from Brownells.
LongRange
11-23-2014, 02:13 PM
I also use the neutral kiwi.
BillPa
11-23-2014, 02:37 PM
I use Kiwi or Johnson's Paste wax, no preference one over the other.
Bill
GaCop
11-27-2014, 09:09 AM
I use gray marine-tex and neutral kiwi shoe polish as a release agent. +1 for the neutral Kiwi shoe polish.
limige
12-04-2014, 01:59 AM
Thanks guys I plan to give this route a try sinve everyone seems to like it so much
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.