View Full Version : 6mm-wsm
bc160
01-01-2015, 07:47 PM
Guys I am looking for some ideas as to what your using for dies as well as your necking down process. Plan on using 270wsm as the parent case. Any help would be appreciated.
Blaine
scope eye
01-01-2015, 08:17 PM
I use 243 WSSM for the neck and shoulder and a gutted 270 WSM on mine.
Dean
bc160
01-01-2015, 09:36 PM
Dean are you able to go from 270 down to the 243 wssm?
Thanks
scope eye
01-01-2015, 09:44 PM
Yes I run them through my 6.5 WSM dies first, then my 25 WSSM then finish off with the 243 WSSM dies, you can do it in one pass with the 243 WSSM, but they come out nicer if you do multiple steps, and WSSM dies are not that expensive, and they 6.5 WSM dies are lee they were only 30 some odd dollars.
Dean
bc160
01-01-2015, 09:53 PM
Perfect. Thanks for the information.
Blaine
bootsmcguire
01-01-2015, 11:57 PM
Blaine as per our PM's I just use a 270WSM Redding Bushing die and have multiple bushings to step it on down.
Dean: didn't know you had one.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.