rolotomassi
01-02-2015, 04:44 AM
Hi all,
I've got a 10/110 FCP chambered in 338LM and decided to replace the OEM spring with a Wolff Spring (32lb Long Action).
Admittedly I very foolishly did not take measurements prior to dissassembly and am at a loss about appropriate distances. Tried looking at thread below, but maybe I missed this information: does anyone have the correct distances from the tip of the firing pin to the firing pin stop nut and the correct length of the firing pin spring? I did somehow manage to put everything back together but can't shake the feeling it's incorrectly reassembled...
http://www.savageshooters.com/showthread.php?14325-Savage-Firing-Pin-Info-and-question-requested
Thank you all for your time and replies.
I've got a 10/110 FCP chambered in 338LM and decided to replace the OEM spring with a Wolff Spring (32lb Long Action).
Admittedly I very foolishly did not take measurements prior to dissassembly and am at a loss about appropriate distances. Tried looking at thread below, but maybe I missed this information: does anyone have the correct distances from the tip of the firing pin to the firing pin stop nut and the correct length of the firing pin spring? I did somehow manage to put everything back together but can't shake the feeling it's incorrectly reassembled...
http://www.savageshooters.com/showthread.php?14325-Savage-Firing-Pin-Info-and-question-requested
Thank you all for your time and replies.