Tmar
03-10-2024, 12:46 AM
All,
I'm working on this very issue with my own solution. The small tab doesn't have enough there to hold the mag in place. I tried to tweak it a bit, but being the steel it is, it snapped instantly. The mag will literally come out if you press from inside the action down. I took off the stock and inserted the mag and marked the depth with a scribe. I then added jb weld to the mag and shaped a proper tab onto the back. I have to fine tune it a bit, but in testing, has been rock solid with no issues. New to this forum and thought I'd share while figuring out how to post things properly.
https://ibb.co/SKDpzt0
https://ibb.co/TLjV9NP
https://ibb.co/grrWsM0
https://ibb.co/mXy7QVX
I had this same problem today and this post gave me a resolution to it. I did the same thing as Mr.G but I used “solder-it” silver solder to attach a piece of metal to the tab. Seems to be a rock solid hold so far.
I'm working on this very issue with my own solution. The small tab doesn't have enough there to hold the mag in place. I tried to tweak it a bit, but being the steel it is, it snapped instantly. The mag will literally come out if you press from inside the action down. I took off the stock and inserted the mag and marked the depth with a scribe. I then added jb weld to the mag and shaped a proper tab onto the back. I have to fine tune it a bit, but in testing, has been rock solid with no issues. New to this forum and thought I'd share while figuring out how to post things properly.
https://ibb.co/SKDpzt0
https://ibb.co/TLjV9NP
https://ibb.co/grrWsM0
https://ibb.co/mXy7QVX
I had this same problem today and this post gave me a resolution to it. I did the same thing as Mr.G but I used “solder-it” silver solder to attach a piece of metal to the tab. Seems to be a rock solid hold so far.