View Full Version : Scope Ring Question
Hi all, what Talley Rings do you use for a 11/111 Lightweight Hunter? I've gotten some conflicting info on what model to order.
The scope is a Leupold VX-3 1.75x6 X 32mm, 1"
Also, would you suggest Low or Medium height for the rings?
Your advise please.
Thanks so much!
Greg
Leatherstocking
11-19-2020, 12:57 PM
Lower the better in my opinion, as long as the objective lens clears the barrel. I have put 3-9x40 scopes on 3 newer Savages in last few years with the low rings.
No experience with those rings. You’re not going to save much weight on rings. Solid is good.
Apollo117
11-19-2020, 02:05 PM
My experience has been similar to @Leatherstocking. However, I use a DNZ one piece low mount for my 3-9x42 Trijicon AccuPoint my my model 16 LWH.
I put Talley lows on my Tikka. The Burris Fulfield 3-9x40 doesn't have any clearance issues.
jpdown
11-19-2020, 07:31 PM
I’ve got a couple of Savage LWH actions. I’d go with Tally low rings with your 1.75-6x Leupold scope.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.