TMcCloskey29
02-05-2021, 11:13 PM
I recently came across a barreled action for a Savage 111 in 7mm rem magwith a top bolt release for a great price, so I bought it with intentions of fixing it up to be my western rifle. According to the original owner, the rifle came with a blind mag. I ordered a Bell & Carlson sporter stock, and the appropriate (or so I think) magazine well, magazine, trigger guard, and action screws. While attempting to assemble the rifle, I noticed that it is impossible to get the action to seat correctly in the stock if
the magazine / magazine well is seated fully in the underside of the stock, and vise versa. In the photos you can see that either the action or the magazine is sticking out when the other is pressed into their correct spot in the stock. To make things more frustrating, the front action screw that I ordered from Midway is 1/4” too long. Does anyone have any constructive input?https://uploads.tapatalk-cdn.com/20210206/f254da81f41ae5e087359910b24dc025.jpg
https://uploads.tapatalk-cdn.com/20210206/b2ac5b5fa06a3e93e43394ed7484bbad.jpg
Sent from my iPhone using Tapatalk
the magazine / magazine well is seated fully in the underside of the stock, and vise versa. In the photos you can see that either the action or the magazine is sticking out when the other is pressed into their correct spot in the stock. To make things more frustrating, the front action screw that I ordered from Midway is 1/4” too long. Does anyone have any constructive input?https://uploads.tapatalk-cdn.com/20210206/f254da81f41ae5e087359910b24dc025.jpg
https://uploads.tapatalk-cdn.com/20210206/b2ac5b5fa06a3e93e43394ed7484bbad.jpg
Sent from my iPhone using Tapatalk