View Full Version : Barrel tuner brake
jkv45
07-31-2021, 09:10 AM
Is anyone using a barrel tuner or tuner brake? Erik Cortina's EC Tuner Brake seems to be getting a lot of attention lately.
I've seen some testing, and they seem to be able to reduce group size.
How do they work?
Thanks.
celltech
07-31-2021, 12:39 PM
I have one on order and will chime in when I get it...
Robinhood
07-31-2021, 01:21 PM
How do they work?
Thanks.
JKv45, Here is one of many articles on the web. They do a much better job of explaining that I have the ability to do.
http://www.targetshooter.co.uk/?p=660
jkv45
07-31-2021, 04:40 PM
Thanks guys.
Next question - is it worth having a standard, non-threaded, barrel threaded to accept one?
Anyone have their Savage barrel threaded? Does it need to be removed from the receiver to do it?
celltech
07-31-2021, 05:03 PM
It's impossible to install one without having it threaded :p I did have a Savage .308 barrel cut down to 18" and threaded for a brake, but I have the tools to remove it so I did. I think most smiths can thread it on the receiver if you strip off the extra stuff.
jkv45
08-01-2021, 09:14 AM
This was one of the better tests I saw with the EC Tuner Brake -
https://ultimatereloader.com/2021/06/10/tested-new-ec-tuner-brake/
Larrykwebb
08-22-2021, 09:56 PM
I have not used his but I have used a Harrels tuner brake for considerably less money..
Yes they do work
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.