awp101
05-28-2022, 04:27 PM
I'm about to make a deal on an action at the LGS. According to the tag it started life as a Model 12 VLP in .22-250. I took measurements and notes last time I was there but they don't really match what I'm finding in the FAQs nor am I finding a lot of single shot information in general.
G series sn (that was all I took down DOH!) with Accu-Trigger, screw spacing according to my calipers is 4.06", barrel shank is 1.01". I did not note top or bottom bolt release (I didn't know that was a thing when I was making my notes), right bolt/left port.
I'm considering an AT-One but I'm not sure if I should select center-feed or staggered (single shot doesn't come up as an option). I'm just not real sure at this point if my measurements are wrong or if this is an odd duck that doesn't conform to "normal" Savage parameters.
Any help is appreciated! Thanks!
G series sn (that was all I took down DOH!) with Accu-Trigger, screw spacing according to my calipers is 4.06", barrel shank is 1.01". I did not note top or bottom bolt release (I didn't know that was a thing when I was making my notes), right bolt/left port.
I'm considering an AT-One but I'm not sure if I should select center-feed or staggered (single shot doesn't come up as an option). I'm just not real sure at this point if my measurements are wrong or if this is an odd duck that doesn't conform to "normal" Savage parameters.
Any help is appreciated! Thanks!