suppressor for 6.5CM

[Bassfish1951]

I have an axis II 6.5 CM thinking of putting a suppressor on it . Any suggestions on brand, thread size and barrel length would be helpful .
It is a 20" barrel on a standard compact/ youth model would I need to go shorter ?


Thanks

[wbm]

Not really recommended for a sporter barrel.

[Bassfish1951]

Not really recommended for a sporter barrel.


Thanks for the reply , My barrel is .58 at the end so I will think different barrel if I want to suppress .

[NF1E]

I really like OSS suppressors on my rifles. For the 6.5 I am using a 30 cal suppressor which I move to different rifles. Granted I use Varmint or Bull profile barrels so there is plenty of beef. Whatta Hobby!

[Fuj']

If you like your barrel.....You can have your barrel threaded for 9/16th. You would have a minimal
interference shoulder to tighten but would work.

[Bassfish1951]

If you like your barrel.....You can have your barrel threaded for 9/16th. You would have a minimal
interference shoulder to tighten but would work.

Not so much like as budget. I have 2 Great granddaughters and 2 small rifles for them to progress up to when it's time for deer hunting. A 6arc and this 6.5CM. The plan is one goes in the blind with dad and the other with Papa. Just getting ready