That's the only way I can get it done here , smith says not enough barrel for the round, liability reasons he won't install a 300 on a Ss, he told me go ahead but he won't. So I'm kinda in a spot
Printable View
That's the only way I can get it done here , smith says not enough barrel for the round, liability reasons he won't install a 300 on a Ss, he told me go ahead but he won't. So I'm kinda in a spot
And no one makes a small prefit 300 um, not even savage.
Because of course they never made them:rolleyes:
Doesn't make much sense. I've had a 338 Edge done in a small shank, varmint contour. Don't know why a 300 RUM would be an issue.
I know lots of people have but I dont have many choices
Who made it?
The barrel thickness and diameter of they action is not the weakest link, it is actually the bolt face and even that can take a pounding, I have 12 different calibers
based on the RUM From 6mm to all the way to 458 and some are screwed on to a Stevens 200s action, and I don't take no prisoners when I load, and yet here I am typing away, you are making to much of this, just screw on a barrel and watch for pressure signs and you will be fine.
Dean
who have you talked to?
Also periodically examine the bolt face and look for hairline cracks, and just change it out if you find any.
Dean
like Scope eye said, head space it correctly, watch your pressures and go for it.
I talked to nss, kreiger and my local guy . he got me all convinced when he said that a local had one blow up using factory ammo some years back, and then I went and looked online and found 2 more instances of them letting go. That's why he won't do it.
I am sure that is true, although I would love to know the load they were using, I am sure they did not forward that info, and just blame it on the gun.
Dean
I'm not sure any on that but the info that was there on 2 of the 3 were the early ones , I assume thats exactly what I have. Either way tho I want to re barrel who makes a prefit that I want
Shilen, McGowen
Ok I will have to see what they tell me
Actually to top that, there are some members here including me, that have 50 Cals bolted to small shanks, as we speak mine is on a Stevens 200 and this round holds the same amount as a RUM, one member sixonetonoffun must have 500 rounds down stream, on his.
Dean
you mean a 50 bmg????
No, I really hope you are kidding, here is the link it is a good read.
http://www.savageshooters.com/showth...50-Cal-Wildcat
Dean
That is a sweet round , awesome job