Printable View
Hey Jim, the 2 springs that SSS sent me were brown in color, but when I installed them in my rifle and set them at the lowest setting they actually produced higher trigger pulls than my stock spring. My stock spring can be set to 2.5 lbs at the lowest setting. The ones I received came in at 2.75 and 3 lbs at their lowest settings. Lisa said my action must be "out of spec" which I didn't buy as if it were I don't think I would be able to get it as low as I can with the stock spring?
I got mine from gunshack, they were silver and adjusted below 1.5 pounds, I bumped them up to just under 2 pounds because thats where I like them. did 4 rifles with them. I didnt know Jim carried the springs, any chance you can get the sears Jim?
I contacted the 3 shops that supposedly have this spring.... NSS....SSS ...and Gunshack.
Jim and his crew at NSS was nice and polite ( as we see here)...but had a $50 minimum order, so that didn't work for me. Gunshack said a few weeks ago that they were "out" of this part, and will likely get more mid/end of April. That left me talking to Lisa at SSS...who had them in-stock and was willing to sell a small $ part order. Problem is what we are facing....not knowing "for sure" what the heck I got. The part came in a clear, unmarked ziplock baggie, no part number anywhere. When I pressed her about this being the right part, she said she thinks so, ...that's what's she's told, etc, etc..... not very confidence inspiring.
I've found out this info in the meantime.... hope it can help others here avoid this sort of nonsense--->
6 oz spring.....part number #106424
1.5 lb spring...part number #105270
2.5 lb spring...part number #105696
Savage will sell you this part if you first sign a liability waiver that they will send you upon request. But I think you must also be on-record of having a centerfire Accutrigger rifle... I didn't have this. I'm using this spring in another gun project I'm working on. Savage will sell this for $2 or even free, depending on how your talks go with them as you order ( they will sneak-in a "warranty" claim).
If any of you guys do this through Savage or others....maybe ask for 2 or 3 springs and help out some guys here ?????
All we needed was getting a part in a labeled bag with part number....done. Why this isn't done is a mystery and beyond me.
+1 Chuk! The trigger on my FCP-SR feels like less than a lb., Feels like zero take-up or pre-travel too. Got 500 rounds thru her and not one misfire or any issue. It's making my 3lb Timney on my AR feel like a bad trigger!
Quote:
Originally Posted by chukarmandoo
Well new people come along needing the information and in this case I needed it, very helpful. As I have an order into NSS I am adding the 1.5 spring to it.Quote:
Originally Posted by 82boy
Any reason we can't get the sear for the Target Acu trigger )(assume from Savage>?)
I think I am good with the 1.5 lb but curious about future option.
And while I am getting up to speed, is there a sticky for this subject?
I think there should be, I see everything else (very nice) but not one on the acu trigger and its variations. Getting there but still scattered all around.
thanks to all
You would have to have a gunsmith order it for you. Savage will not sell it to regular customers, it's a restricted part.Quote:
Originally Posted by RC20
Part number is: SEAR (6 OZ.) - P/N: 106427 $15.00
Also you might be interested in getting the whole 6 oz target trigger kit: 6OZ. TRIGGER KIT - P/N: 107323 $62.00
Good luck!
Will they sell the sear with the your warrant per use (liability waiver) or is that more restricted?
Again currently just curious and gathering information than want to do it. I like the 1.5 on the Varmint and have the spring ordered with the new barrel for the project rifle from NSS
I am surprised that I can tell the difference between the 2.5 and 1.5 and seem to be inching (or inch pounding) more so its possible I will go over the edge.
I continue to be tickled with the modular nature of the Savages and all the options out there, far exceeds anything else I have looked at.
I am not into in depth tech work (at home, get enough of it at work) the nature of the Savage is easy enough that its not a chore.
Precision Target Accu trigger goes from 2.5 lbs. to 6 oz pull by adjusting it.
Well I found my current limit Saturday! I had 3 or 4 go off before I thought they would (all fully controled and aimed at target)
So the 1.5 lb is more than good enough for me at least for now. I may leave it there or adjust up a tad. It came at must have been 2 lbs at least cross check with the non Varmint setup.
I do have the spring ordered from NSS. Had not seen them listed on their site.
Learning about these is turning out to be darned interesting in all sorts of ways!
I think I am good with the Varmint! I may change my mind down the road.Quote:
Originally Posted by Fotheringill