Unfortunately no. Do to a pending move to the East Coast this summer I probably won't get to shoot any more big matches until next year. Once I get set up in NC though I should be able to get more involved than I have been out here.
Printable View
Unfortunately no. Do to a pending move to the East Coast this summer I probably won't get to shoot any more big matches until next year. Once I get set up in NC though I should be able to get more involved than I have been out here.
The newest member to my savage family. Its a savage 111 action with tactical bolt handle mated to a Mcree Chassis supported on a harris bipod. Caliber is a 300 Win mag spiraling thru a Shilen Match 26" barrel threaded and ready for my Silencer tech Suppressor. The backend is a Magpul PRS folding butt stock with an accushot monopod. The glass is a Vortex Viper 6x24x50 Mildot reticle held by Seekins Precision rings on a magnum 20moa EGW rail.
http://i90.photobucket.com/albums/k2...165046%202.jpg
Outstanding , looks great!!!!!!!!!!!!!!!
Savage 10 FCP-HS / CDI bottom metal with AI mags / Leupold Mark 4 E/RT 8.5-25x 50mm / Warne steel rings and base / Bradley cheek rest / Atlas PSR bipod
http://i426.photobucket.com/albums/p...dbb3b97c21.jpg
http://i426.photobucket.com/albums/p...f7d1e2fe32.jpg
First 3 shot group at 300 yards (Fed GMM 168 SMK)
http://i426.photobucket.com/albums/p...9f04228680.jpg
Load development at 100 yards (3 shot groups) I thought they may be flukes but confirmed them in all three rounds at sub 1/4 moa. Original measurements done at the range with a ruler, corrected later at home with calipers. Varget and H4895 were sub 1/2 moa no better than factory GMM.
http://i426.photobucket.com/albums/p...58c8a1ec83.jpg
remeasured with calipers at .190"
http://i426.photobucket.com/albums/p...1799f248e5.jpg
remeasures with calipers at .150"
Cheers,
Bobby
Outstanding! Beautiful looking rifle and bench!
Though I must point out that I believe your bipod is on backwards good sir. Unless of course that's the way you wanted it, even though Harris' weren't meant to be put on backwards. With Atlas it doesn't really matter because the legs can be pinned both ways - just comes down to personal preference. But the Harris legs only retract one way.
Stunning rifle. How far is she pushing that out to?
Uncle H... your wife's Model 10 looks good enough to be in a car show....and get best of show!
Uncle H....your wife's rifle looks good enough to be in a car show......it would get best of show!
http://i1084.photobucket.com/albums/...424_192549.jpg.
New guy checking in. 6.5 Creedmoor 10FCP-SR
http://i1084.photobucket.com/albums/..._171618199.jpg
http://i1084.photobucket.com/albums/..._181301040.jpg
Special order through my FFL, Savage quoted 6 weeks. Got it in 3!!!
http://i1084.photobucket.com/albums/..._194437515.jpg
First three shot group after zero with factory ammo. Hornady 140g ELD-M
I have H4350 and IMR4451/ 140g ELD-M and 140g Berger Hybrid to start load development.
What size are those squares?
Looks like 1 inch given the group size and range. But that's guessing.
Each square is .5", 1"center in the white.
Really, wow, nice shooting.
Thanks. I need to bed the recoil lug area on the B&C and lighten the accutrigger a bit.
Anyone have an opinion on bedding the B&C? The recoil recess is much larger than the stock accustock lug.The lug is making contact with the rear of the recess only.