As requested this is where you guys can put pics of your rigs and such for these models.
Printable View
As requested this is where you guys can put pics of your rigs and such for these models.
Guess I'll go first - here's my LH Axis build in .284 Winchester.
Action T&T'd by SSS
Timney Trigger
Shilen 1-9 twist barrel (23")
SSS Pro Hunter stock
Fluted bolt body
Customized bolt handle
Bead Blasted and Parkerized Finish
DNZ Hunt Master scope mounts
Bushnell Elite 3200 3-9x40mm (for now)
http://img.photobucket.com/albums/v6...DSCN0551-1.jpg
http://img.photobucket.com/albums/v6...DSCN0557-1.jpg
http://img.photobucket.com/albums/v6...f/DSC00852.jpg
Royal Jacaranda stock in last picture is for a future .223 build.
I'll follow with mine:
Savage Axis
SSS Axis Pro Hunter Stock
McGowan 26in SS 1 in 10 twist Varmint Contour
Rifle Basix SAV-1 Trigger (1.5-2lbs)
SWFA SS 10x42
EGW 20MOA Rail
Karsten Cheek Riser
SPS2 Adjustable, butt plate
Modified 10rds Box mag (created by a friend)
http://i1281.photobucket.com/albums/...psb3f42dda.jpg
http://i1281.photobucket.com/albums/...pse29ade84.jpg
http://i1281.photobucket.com/albums/...ps59ce32fd.jpg
Before the final mods above, but she shoots.
http://i1281.photobucket.com/albums/...psdbcc9624.jpg
MrFurious your build looks great as it was the first in the Pro Hunter stock. I haven't finished up the final details on mine yet, but I'm quite happy with the way it has come along.
[QUOTE=MrFurious;211311]Guess I'll go first - here's my LH Axis build in .284 Winchester.
Action T&T'd by SSS
Timney Trigger
Shilen 1-9 twist barrel (23")
SSS Pro Hunter stock
Fluted bolt body
Customized bolt handle
Bead Blasted and Parkerized Finish
DNZ Hunt Master scope mounts
Bushnell Elite 3200 3-9x40mm (for now)
MrFurious did you ever do a range report on this build?
Savage Axis 223 action
Savage 12vlp barrel, 1:7 twist (changed for a Shilen bull lately)
EGW 20MOA base
Bob Fortier stock, bedded
Mystic Precision Mpod bipod
Homemade bold-knob (bro-in-law)
Vortex Crossfire 8-32 x 50 scope
Rifle basix trigger
I shot my first F-Class season this summer, now getting ready for next season. New stock in the works, new barrel installed, will be shooting the Berger 90 vld for next season, should be fun
http://i115.photobucket.com/albums/n...ps220765b5.jpg
http://i115.photobucket.com/albums/n...ps2eea5d2c.jpg
Mine is a very standard rig for hunting. Axis in .223.
Sent from my Nexus 7 using Tapatalk 4
****** image upload not working on forum...
http://postimg.org/image/v2aly9nsx/
Sent from my Nexus 7 using Tapatalk 4
No I haven't. My reloading equipment has been boxed up most of the summer (and still is) due to a remodeling project. Hard to setup your reloading equipment when your shiney new reloading area still doesn't have a work top. LOL I'm also waiting on a replacement upper cabinet since the first one they sent me was damaged. Hopefully those two things will both be resolved in another week or two.
http://img.photobucket.com/albums/v6.../Remodel35.jpg
http://img.photobucket.com/albums/v6.../Remodel36.jpg
Can't upload images to the forum, they have to be hosted on another site like PhotoBucket and you post the IMG code they provide here.
boisvert's pic:
http://s8.postimg.org/lhqzbdyh1/IMG_20131008_103526.jpg
I assume we'll start seeing more pictures in this week as the Boyd's stocks start hitting the streets. This thread will hopefully turn into a one stop shop for all the configurations that people will come up with for their Axis rigs. I myself will have another new item to show off hopefully by this weekend time frame!
Subscribed!
Hey fellas, this is my first post. I've only had my Axis for a few months. I bought the .223 threaded (SR) version a while back. I was initially disappointed with the accuracy, but in defense of the Axis, I was shooting the cheap 55 grain stuff. I started hand loading to see if that would help, starting out with 65 grain Sierra Gameking bullets. The accuracy on this rifle is pretty good now. It is shooting under MOA at 100 yards. I worked on the trigger early on and got it down to 2 lbs 5 oz, but wanted better. I decided to invest in the Basix trigger, which got me down to just under 1 1/2 lbs and passing the safe tests.
I have been following Lonewolf's build and I might pull the trigger on the Sharp Shooter Supply (SSS) stock soon. For those that have the SSS stock, did it come with swivel studs, or did you install them? Do you use the factory recoil lug, or does one come with the SSS stock?
Anyway, here is a pic of mine as it is. The flash suppressor I put on for looks. I took it off later, but may put it back on if I can verify it doesn't negatively impact accuracy.
http://i412.photobucket.com/albums/p...ps41d5abb8.jpg
I moved the factory recoil lug and sling swivel studs from the factory stock to my ProHunter Stock. Took a few minutes to reinstall them. I drill a hole smaller than the threads on the studs but no deeper than required and screw them in!
Just an FYI, in another month or so I will probably move this entire thread to the Pictures Post board where it should be. I'll leave it here in the meantime to get the ball rolling as all the new stock pic's start rolling in.
I guess I'll add these to the file:
Axis Pro Tac stock from SSS.
http://i1281.photobucket.com/albums/...psed90f0aa.jpg
http://i1281.photobucket.com/albums/...ps2fb184e6.jpg
Sent from my HTCEVOV4G using Tapatalk 2
Can you post the link to that stock? I didn't see it ^^
Lonewolf, you need to empty some PM's in your inbox.
Just a suggestion to Sharp Shooter Supply, I think it would be a good idea to include a little information about the new Pro Tac stock on your webiste. I know it is not available currently, but a COMING SOON would definitely let a lot of people know about it, especially those that are not familiar with SavageShooters.com. Thankfully, LoneWolf told us about it. I was about to make up my mind on an aftermarket stock and had no idea about the Pro Tac stock until I saw the one LoneWolf has. I might have gone in a totally different direction had I not known about the Pro Tac.
Not mine, but a pic I came across. EOTech with a 16" BBL. Bet it's a lot of fun.
http://i38.photobucket.com/albums/e1...psc463a279.jpg
Decided to try a new camo pattern this week as after looking at the tiger stripe version I wasn't fully satisfied with it and felt I could do something better.
I went for an ATACS SnakeSkin theme and am quite happy with the way it turned out. The pictures do make it look much more tan than it actually is though, so I tried to get some different lighting. Let me know what you think!
http://i1281.photobucket.com/albums/...psbc28918f.jpg
http://i1281.photobucket.com/albums/...ps0e551115.jpg
Under a different lighting:
http://i1281.photobucket.com/albums/...psed49e9db.jpg
http://i1281.photobucket.com/albums/...ps29e4050c.jpg
http://i1281.photobucket.com/albums/...psde62a1d7.jpg
Goal is to try and get it on the range next weekend. for some 100 and 200yd groupings.
Got some in natural Lighting. These do it much more justice.
http://i1281.photobucket.com/albums/...ps9227a4b5.jpg
http://i1281.photobucket.com/albums/...g?t=1382913884
http://i1281.photobucket.com/albums/...g?t=1382913890
http://i1281.photobucket.com/albums/...g?t=1382913895
The new paint looks a lot better in my opinion. A lot more time involved.