Upgrading to Target Sear and Target AccuTrigger

[gguinn]

So help out here, a struggling newbie, with some "Trigger Pull 101". Had my gunsmith install the orange blade target trigger assembly on a 12 VLP with the hope of getting trigger pull "somewhat" below 1 lb. He was not able to get below 1 1/2 lb, which is about what I got with the factory trigger. So the question is, how does one get trigger pull of the advertised 6 0z? is it trimming the safety blade spring, trimming the trigger return spring or somehow modifying the sear spring? Any suggestions would be greatly appreciated and be of of great help in understanding the discussions in this thread.

[Rocketvapor]

I have finished playing with the wife's trigger for the night.
I'll comment more in my Member Build thread tommorow but with the right springs you can have a 2oz blade and a 7oz total pull with the standard trigger.
I could get lower but was really unstable so went back to 2/7.
Light blade, decent step up to trip the trigger and no false trips.
I also came up with a shim method that is a little more stable.



I really like the CHEAP Digital pull gauge I bought.
Reads to the nearest tenth of an ounce starting at 1.7oz.
From lowest reading up to about 3 pounds it calibrates (with dead weight) to about 0.1oz.
Has Live mode plus Peak/Avg mode. Is a real help juggling blade and trigger spring force.
Unless you keep your finger calibrated, measuring spring force just makes good sense to me.