Make sure the action and the magazine are seated in the stock.
Slowly operate your bolt with a loaded magazine. Watch to see if the bolt catches on the rear of the cartridge. If so, then the cartridges are sitting high enough. If no you need to raise the cartridge by opening the lips of the magazine in the rear very slightly until the bolt pics the cartridge up.
If it picks up the cartridge then it fall below then you have a situation causing the cartridge to tilt up forcing the case head to fall below the bolt head. You might try to open the front of the lip some.
After looking at it closely you will see what needs to be done. Others may give you different guidance. Good luck Naughty
Bookmarks